Installation Manual Stec 55x

1. S Tec 55x Autopilot Manual

.S-tec 55x manual S-tec 55x manual.s tec gpss installation manualstec 55x manual cirruss tec st 670stec autopilot troubleshootingstec 3100 manualgenesys helisas installation manualdifference between stec 55 and 55xs-tec autopilotThe primary purpose of the System 55 Pilot Information Manual. (PIM) is to provide potential S-TEC Autopilot buyers with step- by-step Functional Preflight and InSystem 55X Genesys Aerosystems One S-TEC Way, Municipal Airport, Mineral Wells, TX 76067 USA. 86212 of auto trim or manual electric trim, if equipped.13 Sep 2015 S-tec 55x Installation Manual.

For Proper Application Reference – Click Here for the Cobham S-TEC STC Directory. Item(s) Autopilot SystemView and Download S-TEC System 55X pilot operating handbook online. Autopilot w/ Altitude Selector/Alerter. System 55X Autopilot System pdf manualAltitude Selector/Alerter. When the S-Tec System Fifty Five X (55X) Autopilot with Altitude information in the basic SR22 Pilot’s Operating Handbook. Note.2nd Ed.

Nov 15, 07 iii. Table of Contents. This Pilot’s Operating Handbook (POH) provides Pre-Flight and In-Flight operatingS-TEC 55X for SR22 Pilot’s Operating Handbook.pdf Avidyne 600-00081-000 Rev07 Entegra PFD Cirrus Pilot’s Guide.pdf N927SF Manuals Gallery11 May 2001 MEGGITT AVIONICS/S-TEC FLIGHT LINE SERVICE MANUAL FOR RATE BASED AUTOPILOTS. Functional Ground Test for System 55X.31 May 2002 This System Fifty Five X Pilot’s Operating Handbook, part number 87109, dated 31. If your aircraft is equipped with an HSI, your S-TEC autopilot will receive. NOTE: If the 55X computer is of software version 5 and above.Retain this record in front of handbook. Upon receipt of a revision, insert changes and 3rd Ed.

Sep 30, 06 iii. Table of Contents.

Contents.Installation Instructions InstallingThis guide will teach you how to install the IT-STEC55X System to an aircraft.Before you BeginDownload the latest version of IT-STEC55X. Extract the Archive with WinRAR, 7Zip, or similar. If you are using a custom instrumentation file, make sure it contains the and item.

If you are using a custom systems file, make sure it contains the item. Make sure your electrical system outputs to the correct properties with at least 8 volts:. Autopilot Power: ' /systems/electrical/outputs/autopilot'.

Electric Trim Power: ' /systems/electrical/outputs/electrim'Step One. Copy the Systems and Nasal folders from the IT-STEC55X folder to the aircraft's folder. Overwrite any conflicts.

Open the -set file of the aircraft, and find the area inside. Add the following inside. Nasal/stec-55x.nas. Finally, add the following anywhere outside:. Copy and Paste from this file, start at line 6. This is the default IT-STEC55X Configuration.

We will be adjusting this later. Step Two (Optional). Follow this step if you want to use the included dialog. Copy the gui folder from the IT-STEC55X folder to the aircraft's folder. Overwrite any conflicts. You may need to remove old autopilot dialogs for the IT-STEC55X dialog to appear.

Look inside the Systems and gui/dialogs folders.Step Three (Optional). Follow this step if you want to use the included 3D Head Unit. Copy the stec-55x folder from the 3D folder in the IT-STEC55X folder to the aircraft's instruments folder.

This is usually Models/Instruments, or Models/Cockpit/Instruments. Make sure you note the location. Overwrite any conflicts. Open your cockpit XML.

This will be a different file for most aircraft. You will need to find it on your own. Add the following. Make sure you change the path to EXACTLY MATCH the location of the stec-55x folder. Make sure the case of the letters is correct. For example, Instruments is not the same as instruments. STEC-55X Aircraft/MyAircraft/Path/To/Instruments/stec-55x/stec-55x.xml 0.0 0.0 0.0.

S Tec 55x Autopilot Manual

Now you will need to adjust the offsets to position the instrument properly. You will need to do this on your own. The property used for the backlighting on the display is ' /controls/lighting/panel-norm'. You may change it if you wish.Step FourYou will need to provide your own Autopilot Master, Electric Trim Master, Electric Trim, Autopilot Disconnect, and CWS Mode switches.

This is because they are not located on the S-TEC 55X Head Unit. I have included an Autopilot Disconnect in the AP Dialog for ease of use. Autopilot Master (No Flight Director): ' /it-stec55x/input/ap-master-sw' (0 = OFF, 1 = ON). Autopilot Master (With Flight Director): ' /it-stec55x/input/apfd-master-sw' (0 = OFF, 1 = FD, 2 = AP/FD).

Electric Trim Master: ' /it-stec55x/input/electric-trim-sw' (0 = OFF, 1 = ON)The following bindings MUST be used in order for the following switches to function properly. An electric trim handler for joysticks and keyboards will be added to this guide soon. Electric Trim Up. Nasal stec55x.button.CWS(1); nasal stec55x.button.CWS(0); CompleteYou have finished installing the IT-STEC55X System.